2″ x 10′ Galvanized Roll Tube for Roll Tarp Systems
This 2″ diameter roll tube is the core of your flatbed tarp system, rolling the tarp up and pulling it in tight under the latchplate for a secure, weathertight seal along the edge of the load. Built with a corrosion-resistant coating, it holds up to the constant weather and road exposure a roll tarp system takes on day after day.
At 10 feet, this section is sized to work with longer tarp runs — a swage on one end lets you connect it to additional tube lengths, so you can build out the full width of your trailer without being locked into a single fixed length. That makes it a practical option for replacing a damaged section or extending an existing roll tube setup without swapping the whole system.
Product Details
| Spec | Detail |
|---|---|
| Diameter | 2″ |
| Length | 10 ft |
| Material | Galvanized steel |
| End Fitting | Swage end for connecting additional lengths |
| Function | Rolls tarp under the latchplate for a secure seal |
| Use | Flatbed roll tarp system core/replacement tube |
Why It’s Worth Adding
- Corrosion-resistant — galvanized coating holds up against rust and weather exposure over the long haul.
- Swage-end connection — lets you join additional tube lengths to match your trailer’s full width instead of being stuck with one fixed size.
- Tight, secure seal — rolls the tarp in under the latchplate, keeping the load covered without gaps along the edge.
- Fits standard 2″ roll tarp systems — sized to match common flatbed roll tarp hardware.
FAQ (for “People Also Ask” targeting)
What does the swage end on a roll tube do?
The swaged end is sized to fit inside the next tube section, letting you connect multiple roll tube lengths together to match your trailer’s full width instead of needing one continuous piece.
How does the roll tube work with the latchplate?
As the roll tube turns, it winds the tarp up and pulls the edge in tight under the latchplate, creating a secure seal along that side of the load.




